Pacta Flap Hinges for Cabinets and Furniture
Pacta Flap Hinges for Cabinets and Furniture
Pacta is a compact, self-supporting hinge for downward-opening flap doors. The system works without cables or gas springs and is suitable for kitchen cabinets, living-room furniture, writing surfaces and other furniture with a drop-down door.
Controlled opening to 90°
The door opens gradually and in a controlled movement to 90°. When fully open, the door aligns with the cabinet base and forms a level surface. Pacta is designed for doors measuring 280–400 mm in height and weighing 1.5–9.5 kg.
Pacta Smove or Pacta Push
Pacta Smove has a damped opening movement and spring-assisted closing. The door opens gently downwards and is closed in the usual way using a handle or grip.
Pacta Push is intended for handleless doors. Pressing the door releases the opening mechanism so that the door can be opened. The Push version also provides a controlled and damped movement during opening.
Choose according to door weight and size
Pacta is available in different strengths, selected according to the height and weight of the door. Wooden doors use a standard Ø35 mm bore. After installation, the door can be adjusted sideways, vertically and in depth.
An additional centre hinge is recommended for wooden doors wider than 900 mm. Cover caps are available in several colours and must be ordered separately. Always check the package contents and choose cover caps that match the furniture.
Frequently asked questions about Pacta flap hinges
What is Pacta used for?
Pacta is used for downward-opening flap doors on cabinets and furniture. When fully open, the door aligns with the cabinet base and can be used as a writing or supporting surface.
What is the difference between Pacta Smove and Pacta Push?
Pacta Smove is used for doors opened with a handle or grip. Pacta Push is intended for handleless doors that are released by pressing the door. Both versions have a controlled and damped opening movement.
Is the door damped during opening or closing?
The damping controls the downward opening movement. The door therefore does not fall freely but opens gradually and in a controlled manner to 90°.
Which doors are suitable for Pacta?
Pacta is designed for doors measuring 280–400 mm in height and weighing 1.5–9.5 kg. The correct strength is selected according to the height and weight of the door.
Does Pacta require cables or gas springs?
No. Pacta is a self-supporting flap hinge that works without cables or gas springs.
Which bore is required for Pacta?
Wooden doors use a standard Ø35 mm bore with a drilling depth of 13 mm. Always follow the drilling diagram for the selected model.
Can the door be adjusted after installation?
Yes. The door can be adjusted sideways, vertically and in depth so that it can be aligned with the cabinet.
When is a centre hinge required?
An additional adjustable centre hinge is recommended for wooden doors wider than 900 mm.
Are cover caps included with Pacta?
No. Cover caps are not included and must be ordered separately. They are available in several colours to coordinate with the furniture.