Push-to-open hinges for handleless cabinet doors

Push-to-open hinges are used on handleless cabinets and furniture where the door is opened by pressing lightly on its front. They are suitable for kitchen cabinets, wardrobes, bathroom furniture and other storage where the door needs to open without a handle or knob.

Here you will find Salice Push hinges for full-overlay, half-overlay, inset and rebated doors. The range includes several opening angles, from models for standard cabinet doors to wide-angle hinges for applications requiring greater access.

The reverse spring opens the door

A Push-to-open hinge has a reverse spring action. Unlike a self-closing hinge, which pulls the door towards the cabinet, the spring in a Push hinge operates in the opening direction.

When the closed door is pressed inwards, the push catch releases it. The reverse spring in the hinge then pushes the door out so that it can be gripped and opened by hand. The hinge therefore provides the opening force, while the push catch holds the door closed and releases it when pressed.

Push hinges and push catches work together

For a complete Push-to-open function, the hinges must be combined with a compatible push catch. Depending on the cabinet construction, the catch can be recessed into the cabinet or surface-mounted with an adapter.

A strike plate or catcher may also be required depending on the push catch and door material. Push catches, adapters, strike plates and catchers must be ordered separately unless otherwise stated on the product page.

Choose the hinge according to the door position

Full-overlay hinges are used when the door covers the cabinet side. Half-overlay models are normally used when two doors share the same centre panel, while inset hinges are used when the door sits inside the cabinet opening. Rebated doors require a hinge designed for the shape of the rebate.

Choose the correct opening angle

An opening angle of approximately 105–110° suits many standard cabinets and furniture applications. Push hinges with wider opening angles, such as 155° or 165°, are available when greater access is required. Check that the door has sufficient clearance from adjacent doors, drawers, walls and internal fittings.

The mounting plate is ordered separately

A mounting plate is never included when purchasing a hinge and must always be selected and ordered separately. The mounting plate series and height must suit both the hinge and the door position. The dimensions and weight of the door must also be considered when determining the number of hinges required.